TE037DURA


Ultra Super Duralumin A7075
RAYS Original Design Mold Form Technology

Among a number of aluminum alloys, the strongest of them all is the Ultra Super Duralumin, which has been adopted for the TE037 DURA.
Maintaining the continuous metal grain flow through RAYS Original Design Mold Form Technology, the Ultra Super Duralumin demonstrates its original strength.
The design is based off the 2017 SUPER GT500 while strength and lightness was optimized, while keeping true to the traditional RAYS six spoke configuration.
The vertical wall of the spoke side is a redution to thickness, which is a process applied to competition wheels, while actively machining and further drilling pockets.
This proved a success in weight loss of 300 grams by this side pocket hole processing.
Optimum shape has been developed for each section and shape to prove maximum strength and rigidity of the wheel.
With repeated research, the finish has been painted to a Brightening Metal Dark Color to enhance the beauty of the original aluminum.

TE037 DURA (Limited production model)

  • ・Method：Ultra Super Duralumin A7075 Forged 1pc. Wheel (Reverse Rim)
  • ・RAYS original test：JWL+R Spec 2
  • ・Color：Brightening Metal Dark (ME)
  • ・Included：Titanium Center Cap (Color chooseable Blue or Silver color./※Blue color set asdefault), Air Valve
  • ・Optional：EU parts set

    • ※Please refer to the “option parts” tab below.

  • ET1 Air Valve
  • Titaniun Center Cap（Blue）
  • Titaniun Center Cap（Silver）


Zapytaj o dostępność i cenę


TE037 DURA (Limited production model) infomation


Variation


Size・Price

inch

  • INCH SIZE FACE INSET HOLE P.C.D. DRILL BORE SAMPLE FITMENT BIG CALIPER CLEARANCE
    (mm)
    20 9 1/2J FACE-1 35 5 114.3 φ29-φ15 φ60.1 LEXUS RC-F Fr*
     ⊿◎
    10J FACE-1 35 5 114.3 φ29-φ15 φ66.1 GT-R Fr*
     □●◇
    10 1/2J FACE-2 30 5 114.3 φ29-φ15 φ60.1 LEXUS RC-F Rr*
     ⊿◎
    11J FACE-2 15 5 114.3 φ29-φ15 φ66.1 GT-R Rr*
     △○◇
    Caution
    • ・All sizes have 14mm nut/bolt hole.
    • ・ * Mark : Tuner size
    • [ MARKS of BIG CALIPER CLEARANCE ]
    • ※Big caliper clearance marks are not suggestions for fitment.
    • ・□： SKYLINE(CKV36, HV37)
    • ・⊿： IS-F
    • ・◎： RC-F
    • ・●： FAIRLADY Z (Z34)
    • ・○： FAIRLADY Z (Z33, Z34)
    • ・◇： GT-R (R35/φ380, φ390 rotor)


Optional Parts

EU Parts Set

  1. Prices vary depending on vehicle type. Check Parts & Gear page for details.

Topic

Use of the design die forging method (“Mold Form FORGED,” RAYS lingo) and extra-super duralumin (A7075 materials)

We used extra-super duralumin A7075 materials. Compared to the A6061 materials commonly used in forged aluminum wheels, extra-super duralumin offers both tensile strength and yield strength that are approximately 1.7-fold what is stipulated in the JIS standards. Processing these materials is difficult; it requires technology such as anti-corrosion measures to be used on various parts. Of course, we also used the original RAYS design die forging method for the TE037 DURA to achieve metal flow lines (metal structure flow) that were molded and produced with as little cutting as possible.


Zapytaj o felgi RAYS


X
Zapytaj o dostępność i cenę