100ï¼… Brand New, TE37ULTRA !
The Ultra model inherits the original TE37 atributes of the 6 spoke design but is fully reinvented. Fulfills the daily stress of high performance vehicles such as the GTR and Porsche, this mold form monoblock offers function and style. Machining logo points, center portion with overhang profiles, anti tire slip knurling features are just some of the features available.
TE37 ultra
- ・Method：Forged 1pc. Wheel (Reverse Rim)
- ・RAYS original test：JWL+R Spec 2
- ・Color：Diamond Dark Gunmetal (MM)
　　　　　 Bronze(almite)(BR)
　　　　　 Matte Blue Gunmetal(GB)(※Order base Color) - ・Included：High Speed Air Control Valve (RAYS new logo)(BK)
- ・Optional：TE37 ultra Center Cap (Standard-type, High-type), EU Parts Set
※Please refer to the “option parts” tab below.
High Speed Air Control Valve (RAYS new logo)(BK)
Zapytaj o dostępność i cenę
TE37 ultra infomation
Variation
-
Bronze(BR) 20inch
-
Diamond Dark Gunmetal(MM) 20inch
-
Matte Blue Gunmetal(GB) 20inch
Order Base Color
Optional Parts
Optional Center cap
- Matt Blue Gunmetal
- Bronze(Almite)
- High type Matt Blue Gunmetal
- High Type Bronze(Almite)
Optional Center cap
- Diamond Dark Gunmetal
- High type Diamond Dark Gunmetal
EU Parts Set
- Prices vary depending on vehicle type. Check Parts & Gear page for details.
Size・Price
inch
-
INCH SIZE FACE CENTER INSET HOLE P.C.D. DRILL BORE BIG CALIPER CLEARANCE 19 8J FACE1 S 48(26) 5 100 φ29-φ15 φ65 ― 48(26) 114.3 φ29-φ13 φ73.1 ⊿8 1/2J FACE1 L 35(32) 5 114.3 φ29-φ13 φ73.1 ▽Θη■⊿◎＃△○★◇45(22) η⊿9 1/2J FACE2 S 44(37) 5 114.3 φ29-φ13 φ73.1 η■⊿◎FACE3 S 22(45) ▽Θη■⊿◎＃△○★◇35(33) η⊿◎10 1/2J FACE4 L 12(42) 5 114.3 φ29-φ13 φ73.1 ▽Θη■⊿◎＃△○☆◇S 22(45) ▽Θη■⊿◎＃△○★◇L 32(22) η⊿◎□â—â—‡11J FACE4 L 15(45) 5 114.3 φ29-φ13 φ73.1 ▽Θη■⊿◎＃△○☆◇Caution
- ※19x8J 5-100, 19x11J scheduled to be discontinued once inventory clears.
- ・5H-P.C.D.114.3 size is not applicable for 14mm bolts. (φ29-φ13)
- ・5H-P.C.D.100 have 14mm nut/bolt hole. (φ29-φ15)
- ・CENTER：L is 12.6mm deeper than S.
- ・Hub clearance listed with TE37 ultra Standard-type Center Cap installed. High-type Center Cap add extra 11mm clearance.
- [ MARKS of BIG CALIPER CLEARANCE ]
- ※Big caliper clearance marks are not suggestions for fitment.
- ・▽： IMPREZA (GDB & GRB 4POT)
- ・▼： IMPREZA (GDB 4POT)
- ・Θ： WRX STI
- ・η： WRX STI (6POT)
- ・■： IS, GS, RC, CROWN (210), MARK-X (3.5L)
- ・⊿： IS-F
- ・◎： RC-F
- ・＃： SILVIA (S15)
- ・△： SKYLINE (R34GT-R, CPV35, CKV36, HV37)
- ・□： SKYLINE (CKV36, HV37)
- ・▲： SKYLINE (R34 GT-R)
- ・○： FAIRLADY Z (Z33, Z34)
- ・â—： FAIRLADY Z (Z34)
- ・☆： LANCER EVO.(VII～IX, X)
- ・★： LANCER EVO.X
- ・◇： GT-R (R35/φ380, φ390 rotor)
- ・◆： GT-R (R35/φ380 rotor)
-
INCH SIZE FACE CENTER INSET HOLE P.C.D. DRILL BORE BIG CALIPER CLEARANCE 20 8 1/2J FACE1 L 36(23) 5 114.3 φ29-φ15 φ73.1 η9J FACE1 L 42(25) 5 114.3 φ29-φ15 φ73.1 η■⊿◎9 1/2J FACE2 L 28(36) 5 114.3 φ29-φ15 φ73.1 ▽Θη■⊿◎◇10J FACE3 S 30(28) 5 114.3 φ29-φ15 φ73.1 ▽Θη■⊿◎＃△○☆◇11J FACE4 L 0 (47) 5 114.3 φ29-φ15 φ73.1 ▽Θη■⊿◎＃△○★◇15(32) ▽Θη■⊿◎＃△○☆◇12J FACE4 L 20(40) 5 114.3 φ29-φ15 φ73.1 Caution
- ※20x9J scheduled to be discontinued once inoventory clears.
- ・All sizes have 14mm nut/bolt hole.
- ・CENTER：L is 12.6mm deeper than S.
- ・Hub clearance listed with TE37 ultra Standard-type Center Cap installed. High-type Center Cap add extra 11mm clearance.
- [ MARKS of BIG CALIPER CLEARANCE ]
- ※Big caliper clearance marks are not suggestions for fitment.
- ・▽： IMPREZA (GDB & GRB 4POT)
- ・Θ： WRX STI
- ・η： WRX STI (6POT)
- ・■： IS, GS, RC, CROWN (210), MARK-X (3.5L)
- ・⊿： IS-F
- ・◎： RC-F
- ・＃： SILVIA (S15)
- ・△： SKYLINE (R34GT-R, CPV35, CKV36, HV37)
- ・○： FAIRLADY Z (Z33, Z34)
- ・☆： LANCER EVO.(VII～IX, X)
- ・★： LANCER EVO.X
- ・◇： GT-R (R35/φ380, φ390 rotor)
-
INCH SIZE FACE CENTER INSET HOLE P.C.D DRILL BORE FITTING mm 19 8J FACE-1 S 48 5 112 φ29-φ15 φ66.6 VW GOLF VI/VII, BENZ A-class 8 1/2J FACE-1 L 38 5 112 φ29-φ15 φ66.6 AUDI A4 S 45 VW GOLF6*/7*, BENZ A-class FACE-2 S 36 5 120 φ29-φ15 φ72.6 BMW 3er(F30, E90)Fr, 5er(F10)Fr 9J FACE-4 S 23 5 120 φ29-φ15 φ72.6 BMW M2(F87)Fr, M4(F82)Fr 9 1/2J FACE-3 S 36 5 120 φ29-φ15 φ72.6 BMW 3er(E90)Rr, 5er(F10)Rr S 43 BMW 3er(F30)Rr* FACE-4 S 23 5 120 φ29-φ15 φ72.6 BMW M3(E92)Fr, M4(F82)Fr* S 25 5 112 φ29-φ15 φ66.6 AUDI A5 10J FACE-4 S 26 5 112 φ29-φ15 φ66.6 AUDI A5*, RS5*, RS4* 34 5 120 φ29-φ15 φ72.6 BMW M2(F87)Rr, M4(F82)Rr 10 1/2J FACE-4 L 23 5 120 φ29-φ15 φ72.6 BMW M3(E92)Rr* 30 BMW M4(F82)Rr* 11J FACE-4 L 37 5 120 φ29-φ15 φ72.6 BMW M4(F82)Rr* Caution
- ※19x8J 5-112, 19×9.5J 5-120 INSET 43, 5-112 INSET 25, 19x10J 5-112 INSET 26, 19×10.5J 5-120 INSET 30, scheduled to be discontinued once inventory clears.
- ・All sizes have 14mm nut/bolt hole.(Drill φ29-φ15)
- ・CENTER：L is 12.6mm deeper than S.
- ・All 5H-P.C.D.112/120: Cannot fit Mercedes(GL Class, GLS Class, R550 4Matic, R350 4Matic 2012-, ML63 4Matic, S550 Plug in Hybrid, V class[W447], GLE63S 4Matic), Rolls-Royce, Bentley, Maybach, W X5 (7seater), BMW X5 (F15), BMW X6 (Active Hybrid), Land Rover.
- ※Sample fitments are for reference only.
- ※ * ：Tuner size
-
INCH SIZE FACE CENTER INSET HOLE P.C.D. DRILL BORE FITTING mm 19 8 1/2J FACE1 S 52 5 130 φ32-φ15 φ71.6 PORSCHE 911 CARRERA(991, 997)Fr
BOXSTER/CAYMAN(981, 987)Fr10J FACE3 S 40 5 130 φ32-φ15 φ71.6 PORSCHE BOXSTER/CAYMAN(981, 987)Rr 11J FACE3 S 53 5 130 φ32-φ15 φ71.6 PORSCHE 911 CARRERA(997)Rr S 63 PORSCHE 911 CARRERA(991, 997)Rr Caution
- ※19x10J, 19x11J scheduled to be discontinued once inventory clears.
- ・Cannot fit Mercedes G55 & G550, Audi Q7, Bentley.
- ・Can be used with OEM nuts and bolts.
- ・All sizes are Porsche HC : Hubcentric 71.6mm.
- ・All sizes have 14mm nut/bolt hole.(Drill φ32-φ15)
Sample Fitment
The sample fitment list are composed of representative names and may vary depending on actual model, year, and grade. Use for reference only; as fitments vary due to vehicle condition, fender clearance, left/right tire balance, tire size/type, and fender clearance, as well as comforming to local laws and safety standards. Note: it is recommended to pre-test fitment with the wheel itself to clear of brake calipers, tie rods, dust cover, etc., before mounting tires for installation.
※ Wheel size list: (example)1775 33 215/60R17 → Rim Diameter(inch) Rim Width(inch)Inset(mm)Tire Size
inch
-
MAKER MODELS FRONT Center Cap REAR Center Cap Standard-type High-type Standard-type High-type TOYOTA ALPHARD/VELLFIRE
20/30 series1980 48 245/40R19 × ○ 1980 48 245/40R19 ○ ○ CROWN ATHLETE 200 series 1985 45 245/35R19XL* ○ ○ 1995 44 275/30R19** ○ ○ ESTIMA 50 series 1980 48 245/40R19XL* × ○ 1980 48 245/40R19XL ○ ○ TOYOTA 86 ZN6 1980 48 ○ ○ 1980 48 ○ ○ HARRIER ZSU60W 1980 48 245/45R19 × ○ 1980 48 245/45R19 ○ ○ MARK X GRX130 1985 45 245/40R19* ○ ○ 1985 45 245/40R19 ○ ○ NOAH/VOXY/ESQUIRE 80 series 1980 48 225/35R19XL** × ○ 1980 48 225/35R19XL* ○ ○ LEXUS GS350 GRL10 F SPORT 1985 45 235/40R19* ○ ○ 1995 44 265/35R19** ○ ○ GS F URL10 1995 44 255/35R19* ○ ○ 19105 32 275/35R19** × ○ IS350 GSE31 1985 45 225/35R19XL ○ ○ 1995 44 255/30R19XL** ○ ○ IS-F USE20 1985 45 225/40R19 ○ ○ 1995 44 255/35R19* ○ ○ NX300h AYZ10 1980 48 245/45R19 × ○ 1980 48 245/45R19 ○ ○ RC300h AVC10 1985 45 235/40R19 ○ ○ 1995 44 265/35R19** ○ ○ RC F USC10 1995 44 255/35R19** ○ ○ 19105 32 275/35R19** × ○ RX450h/200t GYL25W/AGL25W 1980 48 255/55R19XL × ○ 1980 48 255/55R19XL ○ ○ NISSAN ELGRAND PE52 1980 48 245/45R19 × ○ 1980 48 245/45R19* ○ ○ FAIRLADY Z Z34 1985 35 245/40R19 ○ ○ 1995 22 275/35R19 ○ ○ FUGA KY51 1985 35 245/45R19XL ○ ○ 1985 35 245/45R19XL ○ ○ SKYLINE COUPE CKV36 1985 35 245/40R19* ○ ○ 1995 44 275/35R19* ○ ○ SKYLINE HV37 1985 35 245/40R19* ○ ○ 1995 44 275/35R19** ○ ○ X-TRAIL NT32
(Except 7seater&Hybrid)1980 48 225/55R19 × × 1980 48 225/55R19* ○ ○ HONDA ACCORD HYBRID CR6 1980 48 225/40R19XL ○ ○ 1980 48 225/40R19XL ○ ○ CIVIC TYPE R FK2 1985 36 235/35R19XL** ○ ○ 1985 36 235/35R19XL** ○ ○ CIVIC TYPE R FD2 1980 48 225/35R19XL ○ ○ 1980 48 225/35R19XL ○ ○ ODYSSEY RC1 1980 48 225/40R19XL** ○ ○ 1980 48 225/40R19XL ○ ○ VEZEL RU3 1980 48 225/40R19XL** ○ ○ 1980 48 225/40R19XL ○ ○ MAZDA ATENZA SEDAN GJEFP 1980 48 225/45R19 × ○ 1980 48 225/45R19 ○ ○ AXELA Sport BM2FS 1980 48 225/35R19XL × ○ 1980 48 225/35R19XL ○ ○ CX-3 DK5FW 1980 48 235/40R19* × ○ 1980 48 235/40R19 ○ ○ CX-5 KE2AW 1980 48 225/55R19 × ○ 1980 48 225/55R19 ○ ○ RX-7 FD3S 1985 35 235/35R19XL* ○ ○ 1995 44 265/30R19XL* ○ ○ RX-8 SE3P 1980 48 245/35R19XL ○ ○ 1980 48 245/35R19XL × ○ MITSUBISHI LANCER Evolution Ⅹ 1985 35 245/35R19XL ○ ○ 1985 35 245/35R19XL ○ ○ OUTLANDER PHEV GG2W 1980 48 245/45R19 × ○ 1980 48 245/45R19 ○ ○ SUBARU BRZ ZC6 1980 48 ○ ○ 1980 48 ○ ○ WRX STI VAB 1985 35 245/35R19XL** ○ ○ 1985 35 245/35R19XL** ○ ○ WRX S4 VAG 1980 48 245/35R19XL ○ ○ 1980 48 245/35R19XL ○ ○ Caution
- * Possibly to pass the fender line and/or interefere with fitment.
- ** Need caution for fitment, protudes past fender line.
- XL Extra Load standard tire set for high capacity. (same as reinforced standard)
-
MAKER MODEL FRONT Center Cap REAR Center Cap Low-type High-type Low-type High-type TOYOTA ALPHARD/VELLFIRE 20 Series 2085 36 245/35R20XL × ○ 2085 36 245/35R20XL ○ ○ CROWN MAJESTA URS206 2085 36 245/35R20XL* ○ ○ 2095 36 275/30R20XL** × ○ ESTIMA 50 Series 2085 36 245/35R20XL** × ○ 2085 36 245/35R20XL ○ ○ HARRIER ZSU60W 2085 36 245/45R20XL × ○ 2085 36 245/45R20XL ○ ○ LEXUS GS350 GRL10 F SPORT 2085 36 235/35R20XL** ○ ○ 2095 36 255/30R20XL** × ○ IS-F USE20 2085 36 225/35R20XL ○ ○ 2095 36 255/30R20XL** × ○ RX350/450h 2085 36 245/50R20 × ○ 2085 36 245/50R20* ○ ○ NISSAN ELGRAND PE52 2085 36 245/40R20XL** × ○ 2085 36 245/40R20XL** ○ ○ FUGA Y50 2085 36 245/35R20XL** ○ ○ 2085 36 245/35R20XL** × ○ GTR R35 2010 30 255/40R20** ○ ○ 2011 15 285/35R20** ○ ○ MURANO PNZ50 2085 36 265/45R20** × ○ 2085 36 265/45R20** × ○ SKYLINE CROSSOVER 2085 36 245/40R20XL* ○ ○ 2085 36 245/40R20XL* × ○ MAZDA ATENZA SEDAN GJEFP 2085 36 245/35R20XL** × ○ 2085 36 245/35R20XL** ○ ○ CX-5 KE2AW 2085 36 245/45R20XL** × ○ 2085 36 245/45R20XL** ○ ○ MITSUBISHI DELICA D:5 CV5W 2085 36 245/40R20XL** × ○ 2085 36 245/40R20XL × ○ OUTLANDER CW5W 2085 36 245/40R20XL** × ○ 2085 36 245/40R20XL × ○ Caution
- * Possibly to pass the fender line and/or interefere with fitment.
- ** Need caution for fitment, protudes past fender line.
- XL This is extra load standard tires with high capacity. (Same standard as reinforced)
Topic
Racing Concave
High performance vehicles have larger brake calipers which create powerful stopping power. This racing concave design with high rigidity and lightweight features can easily clear these large brake calipers.
This wheel shape was produced with the needs of high performance and functionality.
3D Logo Machining
Even with the different concave offerings for each size, 3D logo machining was placed on each of the dimensional spoke surface. This premium feel can be only expressed by 3D logo machining, and not with stickers.
3D Dimensional Logo Machining
In addition, the VOLK RACING logo machining on the spoke is not only engraved, but engraved to create the letters dimensional. This logo machining finish perfectly matches the high quality wheels.
Machining on the rim flange
The [FORGED] letterings on the rim flange is engraved by machining and not formed by the mold. For the flange line, accents of letters and lines were applied by the machining process.
Knurling Finish
High grip tires support high performance vehicles. For the ultra, the knurling finish is applied to the bead seat to prevent tire slips. The knurling finish is to minimize tire slippage preventing wheel balance displacement.
Ease of air pressure adjustment
For TE37ultra, the air valve with high air flow capacity is included to easily adjust air pressure in shorter time.